UPE ultra high molecular weight polyethylene film
UPE ultra high molecular weight polyethylene film
Blog Article
UPE ultra high molecular weight polyethylene film
P66000 UPE ultra high molecular weight polyethylene film is made of UPE film as the base material and coated with special double-sided PET adhesive on one side. It is characterized by excellent abrasion resistance, low temperature resistance, electrical insulation, chemical stability and environmental hygiene, etc. It is widely used in many fields such as packaging, protection, insulation, abrasion-resistant coating, etc. It is one of the representatives of high-end film materials.
The Latest products
FORMEX GS Series Polypropylene Electrical Insulation Materials
FORMEX GL Series Polypropylene Electrical Insulation Materials
FORMEX GK Series Polypropylene Electrical Insulation Materials
3M PX5008 Acrylic Foam Double Sided Tape
3M CP5108 Acrylic Foam Double Sided Tape
3M 55236 Double Sided Tape
application
Used in the packaging industry for medical devices, food, electronic equipment, etc.
Wear-resistant coatings for internal surfaces of mechanical equipment, conveyor systems, etc.
Used to make pipe linings, seals for valves, pumps and other fluid control equipment.
Protective wear layer for sports and protective equipment.
Good insulation and mechanical protection as cable sheath material.
Property
| Test items | Typical value | Unit | Test method |
| Backing thickness | 0.08 | mm | GB/T7125-2014 |
| Adhesive thickness | 0.05 | mm | GB/T7125-2014 |
| Total thickness | 0.13 | mm | GB/T7125-2014 |
| Adhesion to steel | ≥8 | N/25mm | GB/T2792-1998 |
| Density | 0.93～0.95 | g/cm3 | ASTM D792 |
| Molecular weight | 350～920 | 104g/mol | ASTM D4020 |
| Water absorption | ＜0.01 | % | ASTM D570 |
| Tensile Strength | 38 | Mpa | GB/T 1040.3-2006 |
| Bending strength | 26 | Mpa | GB/T 1040.3-2006 |
| Elongation at break | 50 | % | GB/T 1040.3-2006 |
| Compressive strength (10%) | 27 | Mpa | ASTM D695 |
| Shear strength | 33 | Mpa | ASTM D695 |
| Shore hardness | 60~63 | D | ASTM D2240 |
| Coefficient of friction | – | 0.07～0.11 | ASTM D1894 |
| Temperature resistance | ℃ | -269～90 | ASTM D4894 |
| Thermal expansion coefficient | ℃-1 | 1.5×10-4 | GB1036-1989 |
| Abrasion rate | mg | 80 | GB/T 3960-1989 |
| Dielectric breakdown strength | Kv/mm | 45 | IEC 60243-2:2001 |
| lSurface charge rate | Ohm | 1015 | ASTM D257 |
description
Product Features
1.Excellent wear resistance, good chemical stability.
2.Excellent impact resistance, low coefficient of friction and self-lubricating properties.
3.High strength and high toughness, light weight.
4.Low temperature resistance, electrical insulation properties, and environmental hygiene.